Видео

You've gotta be from Ohio or Minnesota 😂❤ thanks for the vid

In mine I keep a Ferro rod

I usually stand it up, makes for a more interesting 🔥

Thx so much bro! the light shining is def an issue for me so I'm going to search for the lamp!

Greetings and Salutations Looking to be in the market to purchase some #red_oak + #black_cherry mixed trees $570 ($4.99) 🤦‍♀️

I see on your part package it says model number on bottom of cooler. I checked mine and all that information is stamped on the bottom.

Wish you titled the video how replacement.

It's the bead that's leaking. I have a similar issue with mine.

Hey bud, just a heads up the whole panel pulls out

Is that 3 way switch interchangeable from 2000 to 2200?

Different filters made by different manufacturers, and yes, Fram is worst quality.

You don't torque these. The procedure is 1/16th turn once crush washer touches then 1/2 - 2/3 turn to crush washer. These instructions are right on the box fyi.

I work for a few company and a oil and fuel guy. I’ll tell you right now hydraulic oil, standard hydraulic oil jack and other tractors things like that is typically a 10 W 30 detergent. Oil oil will have detergent in. It did not recommend using it for your compressor.

Prime it before tighten the bowl up so air can come out

Thank you for sharing, got this warning today and was dreading how difficult it would be to replace. Glad to see it’s an easy fix.

Thank you. I have been having trouble. Good video

Great video thanks for sharing

En español

Yub I believe my Vw r line have same issues now , I will bring to Vw tomorrow let c

Thanks for this. Took me back to my childhood.

I like changing the plugs on my 2010 and 07 Saab 9-3! right on top! Easy peasy! I've got to help my son with his 2014 Crosstrek this morning. My other son has a 2011 Impreza and I helped him last week. A little easier than the 2014, but not a picnic! Yes, I had to use a magnet on the Impreza! One thing I might add- get a spray can of AeroKroil, break loose the plugs enough to free the crush gasket then spray Kroil into the plug cavity. Kroil creeps into spaces 1 millionth of an inch, let it set for a bit. overnight would be better, but 1/2 to an hour should do it. And, you won't find a better penetrant. I would never use PB Blaster! Nice video!

Ex E&G

You had enough straight nice timber for a great log cabin!

Why keep your black tank treatment with your dirty dump gear? You only use it inside, keep it inside where you don’t need gloves and sanitizer to use it

Thank you for the video!

Upgrade to LiFePo4 battery, higher wattage/capacity inverter and solar panel...well worth the investment for boondocking. Great review, of course low cost RV's these days are a compromise while Airstream is ridiculously overpriced. Good luck.

I hope you had an independent inspection before you bought it.

Looks nice

how much did yo paid for this trailer?

Did that fix it or what?!?!?

Carry your load low especially with a toy tractor 😅

I have a brand new shower and faucet with the same model valve and series 14 cartridge/handle. Installed just like yours and water does not shut off!

great info and i agree change the oil sooner than later, its a long term investment if you change cars every 3 years dont worry about this but if you wanna keep your vehicle in good shape change the oil 30% sooner than the spec in the book.

When I try tightening the lug nut I feel itll strip the threads and the new wheel stud isnt budging at all!

Worth about $500 total.

Prime it a little more and it will start.

Picked one up at a Swap Meet yesterday for $5. This is literally the first video I'm watching on it. I'll need to clean out the volume knob as you did, replace an antenna, and find a replacement knob for the tone.

What’s the problem, he offered more than you think it’s worth. Sell it. Thanks for wasting my time.

Great vid Thank you

Awesome! Can't believe Moen will send you replacement parts & directions! Just what i need! What an amazing warranty!

I'm considering a 758 or 739. On another forum, X758 owners (4 of them) all complained that a carriage bolt on the auto connect lift mechanism rubs on the right side of the frame causing a vibration when mowing. Has that been an issue with your's? Also, do you find your 758 better at blowing snow than your 738 or about the same? Thx.

Great video. I like your calm manner and thorough explanation. And you are to the point with no BS'ng for the first 5 minutes. Thx for making this video.

I just paid $9.97 on this thing. If you take the black cap off the middle spring and load it it should work. It took me a couple minutes but i figured it out!

I find it so relaxing to watch other people work! 😃

Can royal purple be used w0 20

Can Coleman lantern be left pressurized or should I depressurized it?

You know what would've made this more helpful? If it wasn't dark. Thanks.

Could i use this for a shower drain?

That drum is actually a covered dish